Teac PCD450iP, Инструкция по эксплуатации

Страница: 11 / 15

10
4. CD PLAYER
CD PLAYER
REFERENCE
MAINTENANCE&SAFETY
This CD-player can play Audio discs, CD-R, and CD Rewritable. Do not try to play CD-
ROM, CDI, VCD, DVD or computer software CDs.
1 Adjust the FUNCTION selector to CD
2 To open the CD door, press the CD door at the edge marked CLOSE/OPEN.
3 Insert a CD, CD-R or CD-RW with the printed side facing up and press the CD door
gently to close it.
4 Press
PLAY/PAUSE
/ on the set to start playback.
5 To pause playback press
PLAY/PAUSE
/ .
To resume, press PLAY/PAUSE again.
6 To stop CD playback, press
STOP
.
Selecting a different track
During playback you can use or to select a particular track.
• If you have selected a track number in the Stop or Pause position, press
PLAY/PAUSE
/ to start playback.
• Press once briefly for the next track, or press repeatedly until the desired track
number appears on the display.
• Press more than once briefly for a previous track.
REPEAT MODE:
REPEAT1
-plays the current track continuously
REPEAT ALL
-plays the entire CD continuously
• Press REPEAT
button repeatedly to through the repeat mode listed below
REPEAT 1>REPEAT ALL>NORMAL
Programming track numbers into a playlist:
You may store up to 20 tracks in the desired sequence. If you like, store any track more
than once.
1. In
STOP
mode, press the
PROGRAM
button
-the display shows“01”and“PROG” briefly.
2. Press or for your desired track.
3. Press
PROGRAM
button to store the track
4. Repeat steps 1 to 3 to store all desired tracks in this way.
5. To play your playlist, press
PLAY/PAUSE
/ .
• Reviewing your set playlist
• In the stop mode, press or ,the display will show you stored tracks.
Erasing a program
You can erase the contents of the playlist with the following actions:
-Opening the CD door;
-Selecting other audio input sources;
-Pressing
STOP
button twice
Playing a CD









 


