AUX IN JACK
To listen to an external audio source, you need a stereo 3.5mm plug cable (Not included)
1
Connect one end of the 3.5mm plug into the output of the audio source, and the other end of the 3.5mm
plug into the AUX IN Jack.
2
Play the audio source.
3
Set the FUNCTION SWITCH to AM, FM or RADIO position. The ON indicator will light on.
4.
You can now listen to the audio playing from the audio source through the unit.
Adjust the VOLUME KNOB for your desired listening level.
5.
To turn off the unit, set the FUNCTION SWITCH to the OFF position.
Note: Remember always unplug the 3.5mm plug cable from the unit after use.
CARE AND MAINTENANCE
Caring for Compact Discs
*
Treat the disc carefully. Handle the disc only by its edges.
Never allow your fingers to come in contact with the shiny,
unprinted side of the disc.
*
Do not attach adhesive tape, stickers, etc. to the disc label.
*
Clean the disc periodically with a soft, lint-free, dry cloth.
Never use detergents or abrasive cleaners to clean the
disc. If necessary, use a CD cleaning kit.
*
If a disc skips of gets stuck on a section of the disc, it is
probably dirty or damaged (scratched).
*
When cleaning the disc, wipe in straight lines from the
center of the disc to the outer edge of the disc.
Never wipe in circular motions.
*
This unit is designed to play only Compact Discs bearing the identification logo as shown here.
Other discs may not conform to the CD standard and may not play properly.
*
Compact Discs should be stored in their cases after each use to avoid damage.
*
Do not expose Compact Discs to direct sunlight, high humidity, high temperatures,
or dust, etc. Prolonged exposure or extreme temperatures can wrap the disc.
*
Do not stick or write anything on either side of the disc. Sharp writing instruments, or the ink may
damage the surface.
IMPORTANT :
During the replacement of your used batteries, we request that you follow the current regulations as to their
elimination. We thank you for depositing them in a location foreseen for that purpose to ensure their elimination
in a sure manner and with respect for the environment.
NOMINAL SPECIFICATIONS
Power Sources
: AC ~ 240V 50Hz
Batteries 6 x R14/C/SUM-2 (batteries not included)
Power Output
: 0.8 Watt RMS per channel
Frequency Range
: FM 87.5-108 MHz
AM 522-1620 kHz
Frequency Response
: CD - 125 Hz - 15000 Hz
Dimensions
: 223(L) x 201(D) x 126(H) MM
Weight
: 1.2 kg
Weight and dimensions are approximate because we continually strive to improve our products,
specifications may change without prior notice.
Teac CDR29A.p65
2015/9/14, 下午 03:57
5
Содержание PCD250B
Страница 1: ......
