Teac MCDV66BT, Руководство пользователя

Страница: 11 / 31

5
CAUTION: Always disconnect units from power when making or changing any cable
connections to avoid risk of electric shock.
Unit Connection
1. Connect the SPEAKERS OUT R+ channel of the DVD player to the jack of the R+ jack on
the right speaker, and the R- channel to the R- jack on the right speaker.
2. In the same way, connect the L+ and L- channels to the L+ and L- jacks on the left speaker.
Remote Control Battery Installation
1. Open the battery compartment on the back of the remote control.
2. Insert 2x AAA batteries by matching the +/- polarities marked in the compartment.
3. Close the battery compartment.
Note:
To avoid leaking or cracking cells, install the batteries correctly according to polarity.
Use the correct type of batteries. Batteries that look similar may differ in voltage.
Always replace both batteries at the same time. Do not expose batteries to heat or flame.
Remote Control Operating Range
The remote control can be used up to approximately 5 meters straight ahead of the unit. It
can also be operated at a horizontal angle up to 30
o
from the remote control sensor.
If the remote control doesn’t operate properly:
- Check the polarity of the installed batteries (+/-)
- Check if the batteries are drained
- Check if the remote control sensor is blocked by obstacles.
- Check if there is any flourescent lighting, sunlight or other interferences nearby.
Initial Set Up