Teac LE4618FHD, Руководство пользователя

Страница: 10 / 40

2
.
TV PLACEMENT SETUP
6
Parts & Connections
USB
Multimedia
Playback
TV Placement
Setup
Initial Setup &
Input Sources
Remote Control
On-Screen Display
TV & Electronic
Programme Guide
Digital Video
Recording
(DVR)
(OSD) Menu
Reference
Warning for the stand.
The parts
needed for installing the stand (supplied)
TV set Stand Screws(supplied)
4 x ST4 x 28F
Before installing the stand, please ensure that
the Stand is in good condition without
scratches, broken parts or missing parts. If
these problems are found, please contact
TEAC.
How to install the Stand?
1. Place the TV set on a horizontal table covered with a soft cloth, with the screen side down and the bottom side
of the frame near the table edge.
2. Align the Stand to the neck of the TV set as shown in the picture below.
3. Secure the Stand using the supplied screws.
1. Before fixing the Stand on, please make sure the front and back
direction of the Stand is correct as shown in the picture below.
2. When you screw on the Stand, make sure that the neck of the TV set
is in the correct position and fixed tightly.
CAUTION: If the Stand's position is incorrect, the TV will be unstable
and fall over easily.
While installing the stand, please make sure that the
screws are fixed tightly.
CAUTION: If the screws are loose, the TV may
become unstable and fall over easily.
Back
Front
(Longer)
A. The TV screen cannot be tilted forward or
backward like the picture below, as the
stand leg will be damaged and cause the
TV to become unstable.
B. The maximum possible swivel angle for the TV screen is 22°
as shown in the picture.
CAUTION: Forcing the screen to turn more than the maximum
angle will cause the stand to break.
Top View
22
0
22 0
22 0
22 0
0