- -
31
DVD Playback Operation
Preparation
1. Connect the unit to the power supply and press the
POWER
button to turn on the unit.
2. Repeatedly press the
INPUT
button on the remote control to select DVD mode and press the
ENTER
button to enter.
3. Gently insert the disc, with the label side toward the front of the television, into the disc tray slot
until about half of the disc is in the tray and then the disc will be drawn into the disc tray and
loaded automatically.
note: must select DVD mode before insert disc.
4. Press
the
EJECT
button to eject the disc, but the disc can not be drawn into the disc tray by
pressing the
EJECT
button again. You must push the disc until it is drawn into the disc tray
automatically.
Warning:
Use of poor quality discs could result in damage to the television.
DVD Playback
Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If
the codes don’t match, the disc cannot be played. This player’s default code is 4.
Play
Press the
PLAY
button to start playback.
Stop
During playback, press the
■
STOP
button once to stop playback and press the
►
PLAY
button to
resume normal playback. Press the
■
STOP
button twice to stop playback completely.
Pause
During playback, press
the
PAUSE
button once to pause the playback; press it repeatedly to start
step-by-step playback. Press the
►
PLAY
button to resume normal playback.
