20
everyday operation
NAVIGATING THE WHOLE LIST OF CHANNELS
In the channel table or keys serves for moving the focus to the previous or
next channel, or keys for page up and page down.
To watch a specific channel highlight it using or keys then press
SELECT
key
while the Select button is highlighted. Then the name and number of the selected
channel will be displayed in the top-right corner of the screen.
If the selected channel is password protected then a pop up menu is displayed. If the
correct code is entered then the selected channel can be watched. Also you can select
another channel by navigating with or keys.
The scroll Bar in middle of the screen shows relative position of the currently visible chan-
nels with respect to the whole list.
MOVING CHANNELS
Reordering the list can be done by moving programs one by one to new positions. In
order to do a move, the Move button is highlighted on the screen using or
keys. A program move is then performed by pressing
SELECT
key, the colour of the
program will be changed to red. In this state, press or keys to move the
program to the desired location within the list. Once you are satisfied with the position of
the program press
SELECT
key to finalize moving program.
RENAMING CHANNELS
To rename a specific channel, the name must be highligthed (use or keys)
and then select the Edit Name option (use or keys). Press
SELECT
to
activate the rename feature. Following the previous procedure, the name appears on the
right side of the menu with the first character highlighted.
Now /
moves to the previous/next character. / toggles the current
character, i.e.,
b
character becomes
a
on
and
c
on . Pressing the nu-
meric keys
0...9
replaces the highlighted character with the characters printed above
the key one by one as the key is pressed.
Press the
M
key to cancel the editing and
SELECT
saves the new name.
ADDING LOCKS TO CHANNELS
Channel Locking provides a password-protected access to channels selected by par-
ents. In order to lock a channel you should know the Parental Lock password (default
value is set to 0000 in the factory and can only be changed from the
Configuration
Menu
). Select the channel to be locked by highlighting it and select the Lock option.
When
SELECT
key is pressed a password box is displayed.
Enter the parental Lock code you wish to use followed by pressing
SELECT
key. The
Lock icon
will now be displayed in front of the selected channel. Repeat the same
operation to cancel the Lock.
TEAC_22inch_IDTV_draft.p65
22.10.2004, 14:35
20