HS-4000
Release Notes
TASCAM HS-4000
3
CAUTION
If the above screen does not appear, turn the power off
once, and then turn the power on again while pressing
and holding the PAUSE and REC keys. Keep pressing
the PAUSE and REC keys firmly until the above screen
appears
NOTE
The screen shown above lists firmware update files
•
contained in the root folder of the CF card inserted in
the unit’s CF card SLOT 1. The firmware copied in step
2 should appear.
No Update File
appears instead if
there is no update file.
A maximum of five lines of firmware files are shown.
•
If the number of files exceeds this maximum, use the
scrollbar with the up and down arrow buttons that
appears on the right side of the screen or the DATA dial
to scroll through the list.
6 Touch the name of the firmware file that you want
to use to update. The following screen appears.
The left side shows the number of the current
version, and the right side shows the number of
the update version.
NOTE
The screen above is just an example. The actual display
will be different.
7 Touch the
YES
button to start the update.
CAUTION
Do not turn the power off while updating.
8 After updating completes,
Complete
and
PLEASE
POWER OFF
appear at the bottom of the screen.
Turn the power off once and then restart the unit.
9 See “Confirming the firmware version” above and
confirm that the
SYSTEM VERSION
(firmware
version) is the newest one. This completes
updating the unit.
