Teac HA-P5, Руководство пользователя

Страница: 4 / 56

4
(C)
(A)
(B)
Power/volume knob
Front panel
Rear panel
1
Pull the power/volume knob out and
remove the nut and washer.
Use a socket wrench to remove the nut. If a socket
wrench is not available, use needle-nose pliers.
2
Remove the two screws from the sides of
the unit, and then pull the front panel out.
Connector
(A)
Lithium-ion battery
Flexible cable
Bottom panel
3
Remove the four screws from the front
panel opening and rear panel, and slide the
bottom panel off.
4
Disconnect the lithium-ion battery connec-
tor and pull the flexible cable out.
For European Customers
Disposal of electrical and electronic equipment and batter-
ies and/or accumulators
a) All electrical/electronic equipment and waste batteries/
accumulators should be disposed of separately from the
municipal waste stream via collection facilities designated by
the government or local authorities.
b) By disposing of electrical/electronic equipment and waste
batteries/accumulators correctly, you will help save valuable
resources and prevent any potential negative effects on
human health and the environment.
c) Improper disposal of waste electrical/electronic equipment
and batteries/accumulators can have serious effects on the
environment and human health because of the presence of
hazardous substances in the equipment.
d) The Waste Electrical and Electronic Equipment
(WEEE) symbols, which show wheeled bins that
have been crossed out, indicate that electrical/
electronic equipment and batteries/accumula-
tors must be collected and disposed of
separately from household waste.
If a battery or accumulator contains more than
the specified values of lead (Pb), mercury (Hg),
and/or cadmium (Cd) as defined in the Battery
Directive (2006/66/EC), then the chemical
symbols for those elements will be indicated
beneath the WEEE symbol.
e) Return and collection systems are available
to end users. For more detailed information
about the disposal of old electrical/electronic equipment and
waste batteries/accumulators, please contact your city office,
waste disposal service or the shop where you purchased the
equipment.
Pb, Hg, Cd
Introduction
Thank you for choosing TEAC.
Read this manual carefully to get the best performance from
this unit.
After reading it, keep it in a safe place for future reference.
Recycling rechargeable batteries
This unit uses a lithium-ion battery. Lithium-
ion batteries are valuable resources that can
be recycled. Please cooperate in recycling
them.
o
If you have any questions, please con-
tact the store where you purchased the
product.
V Important notice
o
Never disassemble this unit at any time other than
before disposal.
o
To replace the rechargeable battery, contact the store
where you purchased the product.
Removing the rechargeable battery
Before removing the rechargeable battery, turn the unit on and
drain the battery until the unit completely stops operating. (If
the automatic power saving function activates, turn the unit off
and on again.)
o
To disassemble this unit, you will need the following tools (all
available commercially).
(A) Phillips head screwdriver (#1)
(B) 1.3mm hex key
(C) 9mm socket wrench (outside diameter of 12 mm or less)
or needle-nose pliers
Li-ion