ENGLISH
7
Remote Control Unit
The provided Remote Control Unit allows
the unit to be operated from a distance.
When operating the remote control unit,
point it towards the remote sensor on the
front panel of the unit.
<
Even if the remote control unit is
operated within the effective range,
remote control operation may be
impossible if there are any obstacles
between the unit and the remote control.
<
If the remote control unit is operated near
other products which generate infrared
rays, or if other remote control devices
using infrared rays are used near the unit,
it may operate incorrectly. Conversely, the
other products may also operate
incorrectly.
1. Pull out the battery compartment tray.
2. Place the lithium battery (CR2032, 3V) in
the tray.
3. Slide the tray back into the remote
control unit until it clicks.
Battery Replacement
If the distance required between the
remote control unit and main unit
decreases, the battery is exhausted. In this
case, replace the battery with a new one.
Batteries
Battery Installation
Main Unit
(Underside of the unit)
These batteries supply backup power to the
built-in clock when the unit is momentarily
disconnected from the AC power line.
<
If the unit is disconnected from the power
supply and the batteries have been
completely exhausted for about an hour,
clock and timer settings will be lost.
Precautions concerning
batteries
<
Be sure to insert the batteries with
correct positive “
+
” and negative “
_
”
polarities.
<
Use batteries of the same type. Never use
different types of batteries together.
<
Rechargeable and non-rechargeable
batteries can be used. Refer to the
precautions on their labels.
<
When the remote control unit is not to
be used for a long time (more than a
month), remove the batteries from the
remote control unit to prevent them
from leaking. If they leak, wipe away the
liquid inside the battery compartment
and replace the batteries with new ones.
<
Do not heat or disassemble batteries and
never dispose of old batteries by
throwing them in a fire.
