Teac GF-450K7, Руководство пользователя

Страница: 22 / 32

Listening to a Cassette Tape 2
22
To stop fast-forwarding or rewinding, press the Stop button.
When a tape is fast-forwarded or rewound to the end, make
sure to press the Stop button to stop the function.
Never press the Play button (
y
) and Rewind button (
m
)
at the same time.
A To stop playback
Press the Stop button during playback to stop.
B
To suspend playback temporarily
Press the Pause button to suspend playback temporarily. Press
the button again to play again.
C
Fast-forwarding/rewinding
Press the Fast-forward or Rewind button (
,
/
m
) to fast-
forward or rewind a tape respectively.
Before Recording
Before you start recording, make sure that you understand
the following points:
<
The unit requires Digital Audio CD-R or CD-RW media for
recording. Computer CD-R or CD-RW discs do not work with this
unit.
<
Once you have recorded on a CD-R disc, the data cannot be
erased from it.
<
You can add tracks to an unfinalized recordable disc. Once
finalized, a CD-R disc is “fixed” and behaves in the same way as a
CD. Finalized CD-RW discs, however, can be unfinalized, erased
and re-recorded.
<
Due to the system restrictions of CD, a track cannot be less than
four seconds in length, and there can be a maximum of 99 tracks
on an audio CD.
<
If the STOP button or PAUSE button is pressed within four
seconds from the beginning of a track, the unit continues to
record no signal and stops when the track’s length reaches four
seconds.
<
When the recording is finished, “REC” and “- - - - - -” blink for a
few seconds, and the unit then goes into stop mode. Do not
apply shock or vibration to the unit during recording.
<
If the disc reaches the end during recording, the unit will start a
fade-out over a few seconds.
When the fade-out has finished, the unit finalizes the disc
automatically and stops.
<
If the disc reaches the end of the 99th track during recording, the
unit finalizes the disc automatically and stops.
<
The recording time of a track may differ slightly from the original
one.
Serial Copy Management System
This unit is in compliance with the Serial Copy Management
System standard. This standard has been established to restrict
digital-to-digital copying to only the first generation. The basic
rules governing this system are as follows:
Rule 1
A digital recording is possible from a digital source such as a CD,
DAT or MD onto a recordable CD-R, CD-RW, MD or DAT through
a digital input connection. However, further digital to- digital
recording is prohibited for the second and later generations.
Rule 2
When an analog source such as an analog disc or FM broadcast
is digitally recorded by using a CD-R, CD-RW, MD or DAT, this
recorded source can be digitally recorded on another CD-R, CD-
RW, MD or DAT. However, further digital copying is prohibited.
B A C