10
PINNING
PIN VALUE
1. Gain control voltage
: 4.0V, Max:4.5V
2. Tuning voltage
3. Address select
: Max:5.5V
4. Serial clock
: Min:-0.3V, Max:5.5V
5. Serial data
: Min:-0.3V, Max:5.5V
6. Not connected
7. Supply voltage
: 5.0V, Min:4.75V, Max:5.5V
8. ADC input (optional)
9. Tuning supply voltage
: 33V, Min:30V, Max:35V
10. Ground
11. IF output
TEA6415C:
General Description:
The main function of the TEA6415C is to switch 8 video input sources on the 6 outputs.
Each output can be switched to only one of the inputs whereas but any same input may be connected to several outputs.
All switching possibilities are controlled through the IýC-bus.
Features:
n
20 MHz Bandwith
n
Cascadable with another TEA6415C (Internal address can be changed by pin 7 voltage)
n
8 inputs (CVBS, RGB, Mac, CHROMA, )
n
6 Outputs
n
Possibility of MAC or chroma signal for each input by switching-off the clamp with an external resistor bridge
n
Bus controlled
n
6.5dB gain between any input and output
n
-55dB crosstaljk at 5MHz
n
Fully ESD protected
PINNING
PIN VALUE
1. Input
: Max
: 2Vpp, Input Current
: 1mA, Max : 3mA
2. Data
: Low level : -0.3V Max:1.5V, High level : 3.0V Max : Vcc+0.5V
3. Input
: Max
: 2Vpp, Input Current
: 1mA, Max : 3mA
4. Clock
: Low level : -0.3V Max:1.5V, High level : 3.0V Max : Vcc+0.5V
5. Input
: Max
: 2Vpp, Input Current
: 1mA, Max : 3mA
6. Input
: Max
: 2Vpp, Input Current
: 1mA, Max : 3mA
7. Prog
8. Input
: Max
: 2Vpp, Input Current
: 1mA, Max : 3mA
9. Vcc
: 12V
10. Input
: Max
: 2Vpp, Input Current
: 1mA, Max : 3mA
11. Input
: Max
: 2Vpp, Input Current
: 1mA, Max : 3mA
12. Ground
13. Output
: 5.5Vpp,
Min : 4.5Vpp
14. Output
: 5.5Vpp,
Min : 4.5Vpp
15. Output
: 5.5Vpp,
Min : 4.5Vpp
16. Output
: 5.5Vpp,
Min : 4.5Vpp
17. Output
: 5.5Vpp,
Min : 4.5Vpp
18. Output
: 5.5Vpp,
Min : 4.5Vpp
19. Ground
20. Input
: Max : 2Vpp, Input Current
: 1mA, Max : 3mA
TDA9830:
General description:
The TDA9830, a monolithic integrated circuit, is designed for AM-sound demodulation used in L- and L-standard.
The IC provides an audio source selector and also mute switch.
Features:
n
Adjustment free wideband synchronous AM demodulator
n
Audio source-mute switch (low noise)
n
Audio level according EN50049
n
5 to 8V power supply or 12 V alternative
n
Low power consumption
PINNING
PIN VALUE
1. Sound IF differential input signal
: Minimum IF input signal (between pins 1 and 16):60mV
Max:100mV Maximum IF input signal (between pins 1 and 16) :120mV Min :70mV
2. Not connected
3. AGC capacitor
4. REF voltage filtering capacitor
5. Not connected
6. AM demodulator output
: THD:0.8%, Max:2%; S/N:53dB, Min:47%; DC potential:2.15V, Min : 2.00V Max :2.30V
7. Input signal (from AM) to audio switch
: Max:1.2V
8. Output signal from audio switch
: 80dB, Min : 70dB
9. Input signal (from external) to audio switch : Max:1.2V