Teac Esoteric C-03, Руководство пользователя

Страница: 9 / 16

9
Audio input terminals [LINE IN]
Connect these terminals to CD or Super Audio CD players,
DVD players, cassette tape deck, tuner, DBS receivers, etc.
using commercially available XLR or RCA audio cables.
Connect the unit’s R terminal to the player’s R terminal, and
the unit’s L terminal to the player’s L terminal.
Use commercially available cables for the following
connections.
XLR: balanced XLR audio cable
RCA: RCA audio cable
< The pin assignment of the XLR input terminal can be
changed to #3 HOT (+) (See page 11).
< If you are using balanced connectors, push in the XLR plug
until the lever clicks. To remove the XLR plug, push the lever
and pull out the plug.
< The C-03 does not include a phono equalizer so a turntable
cannot be connected to it unless you use an external phono
pre-amp.
To use a turntable you can run the turntable into a phono
pre-amp and then run from the phono-preamp output into
the C-03 using one of the line level audio inputs.
Audio output terminals [LINE OUT]
Connect these terminals to your power amplifier’s input
terminals using commercially available XLR or RCA audio
cables. Connect the unit’s R terminal to the power
amplifier’s R terminal, and the unit’s L terminal to the power
amplifier’s L terminal.
XLR: balanced XLR audio cable
RCA: RCA audio cable
<
The pin assignment of the XLR output terminal is #2 HOT.
<
The same signals are output for both 1/2 for the RCA
terminals. Left channel can be connected to 1 and right
channel can be connected to 2.
GND terminal [SIGNAL GND]
Connection of this terminal with the ground terminal of
another unit may improve sound quality.
< Note that this is not an electrical safety ground (earth).
Power cord
Connect the power cord to the power cord receptacle, and
connect the power plug to an AC wall outlet, after all other
connections have been made.
< Use only the supplied power cord. Use of other power cords
may result in fire or electric shock. Unplug the power cord
when you are not going to use the unit for several weeks.
D
C
B
A
Settings 1
Balance and input level can be adjusted in following steps.
Repeatedly press the SETUP button to select the menu
item to be set.
< If you leave the unit idle for 10 seconds, the setting mode will
be cancelled.
Bal>*** (Left-right balance adjustment)
To adjust the left and right balance of audio outputs.
Settings can be adjusted at 0.5 dB intervals within a range of
L3.0 (dB) to R3.0 (dB).
Default setting is 0.0 (center).
Level>*** (Input level adjustment)
To adjust the level of the selected input. Each input can be
adjusted separately. Settings can be adjusted at 0.5 dB
intervals within a range of –18.0 (dB) to +18.0 (dB). Default
setting is 0.0 (dB).
Use the INPUT buttons (</>) to select options in the
menu item.
To exit the set-up mode, press the SETUP button until
the display returns to normal.
If you leave the unit idle for 10 seconds, the setup mode will
be cancelled automatically.
< Settings are stored even when power is turned off and the
unit is unplugged.
3
2
1
INPUT
SETUP