- 15 -
DV-B400
Digital Terrestrial Receiver
Automatic Channel Search for Television Services(1st Step)
You can automatically detect and save all channels as follows:
➞
➞
➞
• Connect STB as per pages 10 to 12 (as applicable).
• Turn on the power of STB and other devices
connected to the STB.
• Press RED (SUB.T) button and the STB will automatically
search all channels and save them into the channel list.
Once finished, your box is ready to be used.
• Select Channel Search in the Installation Menu.
• Enter the
PIN
Code. (Factory PIN code is
‘0000’
)
• Select the television service you want to search by
pressing the
UP/DOWN
buttons and the
OK
button. A tick
will be shown beside your selection. You may select more
than one television service to manual tune.
• Press
GREEN
(Manual) button and the STB will begin to
search all channels you have chosen and save them into
the channel list.
Manual Channel Search
You can automatically search and save all channels as follows :
Setting up Your System
• Select Channel Search in the Installation Menu.
• Enter the
PIN
Code. (Factory PIN Code is
‘0000’
)
Power On
Main Menu/Installation
Channel Search / Manual
System Connection