34
General Setup Page
You can change the default settings of this unit to customize its performance to your own
preference. Read this section to learn how to set up the system.
Note: The SETUP options should be adjusted while the disc is in stop mode or No Disc
mode.
Follow the steps below to set up your system:
1.
Press the SETUP button on the remote control or the front panel.
2.
The setup menu will appear on the screen. It includes General Setup Page, Speaker
setup page, Dolby digital setup, Video setup page and Preference page. You can exit
the setup menu by pressing the SETUP button again at any time during setting.
3. Press
the
or
(direction buttons) on the remote control
or on the front panel
to
select a sub-menu that you want to set up.
4. Press
the
or
button on the remote control
or on the front panel
to select the item
that you want to set up in the sub-menu.
System Setup
The items included in this sub-menu are shown as
the left.
1.TV Display
This item is used to set the TV display mode.
Press the
or
button to highlight this item.
Press the ENTER or
button to enter the item.
It includes Normal/PS, Normal/LB and Wide, Wide
by default. Press the
or
button to choose the
proper one. Press the ENTER button to confirm
your selection. Press the
direction button to exit
from this item.
Note: Select Normal/PS or Normal/LB when a 4:3
TV is connected.
Select Wide when a 16:9 wide screen TV is
connected.
