Teac CT-W3250S-1, Руководство по обслуживанию

Страница: 26 / 54

n
Additional pair of D/A converters for SCART2 out
n
Improved over-sampling filters (as in MSP 3400C)
n
Additional SCART input
n
Full SCART in/out matrix without restrictions
n
SCART volume in dB units (optional)
n
Additional I²S input (as in MSP 3400C)
n
New FM-identification (as in MSP 3400C)
n
Demodulator short programming
n
Auto-detection for terrestrial TV-sound standards
n
Precise bit-error rate indication
n
Automatic switch from NICAM to FM/AM or vice versa
n
Improved NICAM synchronisation algorithm
n
Improved carrier mute algorithm
n
Improved AM-demodulation
n
ADR together with DRP 3510A
n
Dolby Pro Logic together with DPL 35xx A
n
Reduction of necessary controlling
n
Less external components
n
Significant reduction of radiation
Pinning:
1. ADR wordstrobe 35. Analog Shield Ground 1
2. Not connected 36. Scart input 3 in right
3. ADR data output 37. Scart input 3 in left
4. I²S 1 data input 38. Analog Shield Ground 4
5. I²S data output 39. Scart input 4 in, right
6. I²S wordstrobe 40. Scart input 4 in, left
7. I²S clock 41. Not connected
8. I²S data 42. Analog reference voltage high voltage part
9. I²S clock 43. Analog ground
10. Not connected 44. Volume capacitor MAIN
11. Standby (low-active) 45. Analog power supply 8.0V
12. I²C Bus address select 46. Volume capacitor AUX
13. Digital control output 0 47. Scart output 1, left
14. Digital control output 1 48. Scart output 1, right
15. Not connected 49. Reference ground 1 high voltage part
16. Not connected 50. Scart output 2, left
17. Not connected 51. Scart output 2, right
18. Audio clock output 52. Analog Shield Ground 3
19. Not connected 53. Not connected
20. Crystal oscillator 54. Not connected
21. Crystal oscillator 55. Not connected
22. Test Pin 56. Analog output MAIN, left
23. IF input 2 (if is used only, connect 57. Analog output MAIN, right to AVSS with
50 pF capacitor) 58. Reference ground 2 high voltage part
24. IF common 59. Analog output AUX, left
25. IF input 1 60. Analog output AUX, right
26. Analog power 5V 61. Power-on-reset
27. Analog ground 62. Not connected
28. Mono input 63. Not connected
29. Reference voltage IF A/D converter 64. Not connected
30. Scart input 1 in, right 65. I²S2-data input
31. Scart input 1 in, left 66. Digital ground
32. Analog Shield Ground 2 67. Digital power 5V
33. Scart input 2 in, right 68. ADR clock
34. Scart input 2 in, left