Teac cr-h101dab, Справочное руководство

Страница: 20 / 44

20
Checking the timer setting
Press the CLOCK button to show the current time and then the timer
setting.
Display
example
CD
Timer ON
Using the sleep timer
This function puts the unit in standby after a set amount of time passes.
Press the SLEEP button to set the amount of time (in minutes) until the unit
enters standby.
30 60 90 OFF
When the sleep timer is enabled, the display becomes dim.
Display
example
CD PLAY
SLEEP 25
When the sleep timer is enabled, press the SLEEP button once to show the
amount of time until standby for a few seconds.
Press it again to reset the time.
Automatic power saving function
This unit has an automatic power saving function.
The operation of this function depends on the automatic power saving
setting and the selected playback source.
o
See “APS (automatic power saving) setting” on page 38 for how to set
the automatic power saving function.
When automatic power saving is on
If there is no signal from the selected playback source and no operation
has occurred for about 30 minutes, the unit will enter standby mode.*
o
Turn the unit on again to end standby.
*Power consumption in standby mode is 1 W or less.
Checking whether automatic power saving is on or off
When automatic power saving is on
“APS ON” is shown when the unit is turned on.
When automatic power saving is off
“APS OFF” is shown when the unit is turned on.
Basic operation (continued)