TEAC CD-ROM Installation Guide
1
disc tray:
Use the disc tray to load CDs into the drive. You can open and close
the tray by pressing the eject button.
headphone jack (3.5mm):
You can connect headphones or external speakers
to this jack to listen to an audio CD being played on your TEAC drive. Use a 3.5
mm stereo mini-plug. For external speakers, connect a stereo adapter to split the
output into separate cables for the left and right channels. Such adapters convert
a male stereo mini-jack to two female phono jacks.
volume control:
Use the volume control to adjust the volume. Turning the
control to the right increases the volume. Turning it to the left decreases the
volume. (Lower the volume before you start a CD-ROM audio program to
protect your hearing and the audio speakers.)
on/busy indicator:
The drive features an LED indicator light on the front panel,
which indicates the seek, play, and read operations.
emergency eject mechanism:
If the eject button fails, you can
turn off the
power to the CD-ROM drive
and insert a small, thin rod (such as a straightened
paper clip) into the emergency eject mechanism opening and press firmly to
eject the disc.
play button:
Press this button to play a music disc through the headphone jack.
eject button:
Press this button to open or close the disc tray. (Some CD-ROM
titles disable the manual eject button and rely on software commands to eject the
disc. Refer to the documentation for these titles for more information.)
Note:
We strongly recommend that you do not push the tray in to close it.
Please press the eject button to eject or retract the tray.
Caution:
Do not attempt to use the emergency eject mechanism when the on/
busy indicator is lit or you may seriously damage the disc or the CD-ROM
drive.
disc tray
headphone jack
volume control
eject button
on/busy indicator
emergency eject
mechanism opening
CD-ROM Drive Installation Guide
Model CD-552E
(52X MAX)
IDE/ATAPI Interface
play button
®
CD-552Eshort.fm Page 1 Wednesday, May 14, 2003 10:29 PM
StockCheck.com
