Teac AG-780, Руководство пользователя

Страница: 13 / 32

Manual Tuning
Manual Tuning is generally used to tune to stations
broadcasting a signal that is too weak to be received by
Auto Tuning.
1. Press the TUNER button.
2. Select the AM or FM by pressing the BAND selector
button.
3. Press the TUNING MODE button to change to
MANUAL mode. (The CH indicator disappears
from the display).
4. When the UP or DOWN TUNING/PRESET button is
pressed momentarily (0.5 second or less), the
frequency changes by a fixed step (see STEPS
below).
STEPS
FM: 100-kHz steps
AM: 10-kHz steps
– 13 –
Preset Tuning
This facility is used to store FM, AM broadcasting from
Channel 1 to 30 respectively.
Manual Memory Presetting
1. Press the TUNER button.
2. Select the AM or FM by pressing the BAND selector
button.
3. Press the TUNING MODE button to change to
MANUAL mode. (The CH indicator disappears
from the display).
4. Select the frequency you want to preset by pressing
UP or DOWN TUNING/PRESET button.
5. Press the MEMORY button briefly, MEMORY display
will blink at an interval of 1 second.
6. While the MEMORY indicator is lit, press the TUNING
/PRESET buttons to select the desired channel, then
press the MEMORY button again.
Using the Memory Scan Function
When the MEMORY SCAN button is pressed, the preset
channels in which frequencies in the band (AM or FM)
selected have been stored are scanned at 0.5-second
intervals.
"Back-up" Memory Function
This function conserves the already preset station mem-
ories, and "Most-recent" memory function, even in the
event of a cut-off of power supply, as when the plug is
pulled out of the wall outlet, for 3 days.