408-35043
Rev
D
14
of 30
5.2.
Locking the wire crimp position
The wire crimp height adjustment can be locked in position by inverting the detent pin (see Figure 13).
Figure 13: Location of detent pin
1
Ring stop
2
Detent pin
1. Verify the fine adjustment head setup distance (the distance from the crimper seating feature on the
ram to the top of the crimp height adjustment head). See Figure 14.
NOTE
Some applicators have a special insulation adjustment dial with different range and increments. Refer to the marking on the
front of the insulation crimp dial for correct increments.
Figure 14: Setup distance
1
Adjustment set to zero
2
Fine adjustment head setup distance
