HL-1 Installation Manual
10
Recievers Functions
7
HDCP Indicator –
This light shows that a valid HDMI connection has
been made, “handshake” has taken place, and there is a High Definition
Copy Protect flag in operation. Attempts to copy Digital content will not
be allowed. Any connection to a non-compliant Digital copy device will
cause this light to go off, and will result in the loss of signal.
RECEIVER FUNCTIONS - See Page 8
1
HDMI Output –
Connect this to your Display device – TV, Projector,
etc. All video signals input to the HDMI Input on the Transmitter will
appear here.
2
HDBase-T Link Connection –
Refer to Item (4) above.
3
IRDA In –
Used for connecting to a Powered Infra-Red Pickup Device
(Industry compatible) via 3-conductor mini-jack, or to IR encoded signal
for Pass-Thru to the IRDA OUT at the Transmitter end. See Diagram
above for suggested use.
4
IRDA Out –
Used for connecting to an Infra-Red Emitter for
controlling a device at this end. The IR Signal would originate from the
Transmitter end either from a Powered Pickup or an IR Pass-Thru.
5
Link Indicator –
Refer to Item 9, Above.
6
HDCP Indicator –
Refer to Item 10, above
