408-35037
Rev
A
2
of 5
3.
TERMINAL DESCRIPTION
NOTE
This tool is designed specifically to loose piece side-feed front-carrier terminals. Tool is not designed to loose piece end-
feed, center-carrier or dual-carrier terminals.
3.1.
Side-Feed Front-Carrier Terminals
Terminal consisting of a contact body, crimp barrels, tab and single-carrier strip located adjacent to the crimp
barrels.
Figure 3
3.2.
End-Feed Terminals
Terminal consisting of a contact body, crimp barrels and tab. The tab is located between the contact body
and crimp barrels of the next terminal in sequence.
Figure 4
3.3.
Center-Carrier Terminals
Terminal consisting of a contact body, crimp barrels (or other style termination feature) and tab. The tab is
located between the contact bodies of the terminals.
Figure 5
Contact Body
Tab
Carrier Strip
Crimp Barrels
Contact Body
Crimp Barrels
Tab
Tab
Crimp Barrels (or Other
Style Termination Feature
Contact Body
This Style of Terminal
CANNOT
Be Used with the Cutter
This Style of Terminal
CANNOT
Be Used with the Cutter