TE-Group Guardo Action Cam One, Руководство пользователя

Страница: 11 / 106

11
WATERDROPS & CONDENSATION
Regulary check the lens to see if waterdrops or condensation/fog have appeared as these
may be shown on your footage.
To remove/avoid waterdrops and condensation/fog, these tips might help :
• Spit or lick the port or housing lens. The water will sheet off instead of beading up!
• Apply a water repellent and anti-beading/ anti-fog coating or wax (such as ‘RAIN-X)
• Make sure the inside of the housing and camera is as dry as possible (e.g. dry hands,
no sweat) to prevent fog/condensation
• Don’t leave the camera in the direct sun or near heat and don’t leave it ON
(generating heat) when not necessary
• Open the fogged camera housing and carefully wipe off the fog inside, then close it again
• Try to avoid too large temperature differences as these may cause condensation/fog
Anti Fog inserts are optionally available on www.guardo.be
Note: ‘Muffled’ sound is inevitable when using the camera with the waterproof housing.
MOUNTING THE CAMERA USING THE
DELIVERED MOUNTS
Attaching the camera to any mount, is always done in the same way:
1. Place the camera on the mount’s screw 2. Rotate/point the camera as desired 3. Tilt the camera into the desired
and fasten with the tightening screw shooting angle and fasten with the
tightening screw