408-2823
Rev
AB
2
of 13
1.
INTRODUCTION
The TETRA-CRIMP Hand Crimping Tool 59824-1 (Figure 1) is designed to crimp the terminals and splices
shown in Figure 2 onto stranded wire sizes 22 through 10 AWG (Table 1). For product part numbers, refer to
on the TE Connectivity website.
NOTE
Dimensions in this instruction sheet are in millimeters with [inches in brackets]. Figures are for reference only and are not
drawn to scale.
Read these instructions thoroughly before crimping connectors.
Figure 2: Terminals and splices
1
PIDG
™
ring tongue terminal
8
Flat side
2
PLASTI-GRIP
™
ring tongue terminal
9
Strip length
3
PIDG insulation restriction ring tongue terminal
10
Color-coded insulation
4
PIDG FASTON
™
terminal
11
Striped color code for HD
5
PIDG butt splice
12
Equally-spaced shaded stripes
6
Wire barrel
13
Window indent
7
Insulation barrel
