Doc. No: 411-121018
Printhead setup instructions for the
TE3124, TE3112 & T6112DS
Issue: 1
Date: Oct 2012
Author: I Ridgeway
Print date: 24-Oct-12
Issue date:
: Oct 2012
Page: 5 of 8
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
3.3.
When aligning the printhead ensure
both
sides of the printhead start from the
factory default position with the alignment witness mark in the centre of the
inspection window as shown in Figure 5.
3.4.
To align the printhead, remove the ribbon from the printer and loosen the printhead
retaining screw marked “A” shown in Figure 6 with the tool provided with the printer
shown in Figure 6.
Figure 6- Printhead loosening
Screw “A”
Tool provided
with the printer
Alignment witness mark, showing the
factory set alignment of the printhead.
Figure 5
– Factory Default
