5375 (08/13)
411-121069
INSTRUCTION
CLASS 1- Public
© 2018 TE Connectivity Ltd. family of companies.
All Rights Reserved.
| Indicates Change
TE Proprietary & Confidential Information
Class I Data Classification - See Policy TEC-02-04
11 of 13
Rev [1]
30 May 2018
Dismounting the printhead
1. Remove all the media and transfer ribbon from the printer.
2. Close and lock the printhead.
3. Loosen two screws (6).
4. Open the printhead locking and if necessary remove the printhead from the pins (9).
5. First unplug the power cable (8), following the data cable (7).
Mounting the Printhead
1. First connect the data cable (7), following the power cable (8).
2. Place the printhead into the printhead assembly and insert the pins (9) into the holes (4).
3. Press down the printhead carriage and fix the printhead with the screws (6) at the carriage
using the threaded holes (3).
4. Clean the heating line with the cleaning cloth and IPA. (Please consult TE document 411-
121037,
Thermal Transfer printhead cleaning instructions)
5. Reload media and transfer ribbon.
Figure 10, Removing and replacing the printhead.
TE recommend to change the drive roller, if changing the printhead for wear or damage.
