TE Connectivity RAYCHEM D-200 Series Скачать руководство пользователя

Страница: 10 / 11

Raychem Devices

No: RCPS-200-20
Rev: E1
Date: August 10, 2016

Installation Procedures for D-436-XX and D-200-XX

(Miniseal™) Sealed Crimp Splices

_________________________________________
Unless otherwise specified dimensions are in millimeters. [Inches dimensions are in between brackets]
© 2007-2016 TE Connectivity Corporation. All rights reserved.

If this document is printed it becomes uncontrolled. Check for the latest revision.

(3) The sealing sleeve must not be discolored to the point where it prevents visual

inspection of the splice (overheated condition).

6.3

Inspection for Damage

(1) The sealing sleeve must not be cut or split.

(2) The wire insulation must not show signs of mechanical damage or overheating, such

as cuts, tears, melting, charring.

Inspection Photos:

7.1

Insufficient Heat (Unacceptable)



Meltable Inserts have not flowed



Then sealing sleeve not fully recovered

7.2

Proper Heating (Acceptable)



Meltable Inserts have flowed so as to lose their original shape



Then sealing sleeve is fully recovered

Содержание RAYCHEM D-200 Series












Результаты поиска

Содержание RAYCHEM D-200 Series

Отзывы:

Похожие инструкции для RAYCHEM D-200 Series

Бренды по названию

Популярные бренды

TE Connectivity RAYCHEM D-200 Series, Руководство по установке

Результаты поиска

Содержание RAYCHEM D-200 Series

Отзывы:

Похожие инструкции для RAYCHEM D-200 Series

Бренды по названию

Популярные бренды