408-35208
Rev
B
4
of 7
3.3.
Adjusting the tool
1. Cycle the tool to open the indenters.
2. Remove the locking clip (Figure 4).
3. Raise and rotate the dial (Figure 4) to select a wire size.
Minimum 22 AWG [0.35 mm²]
Maximum 12 AWG [3.00 mm²]
NOTE
The tool must be open prior to selecting a wire size.
4. Reinstall the locking clip.
Figure 4: Dial and locking clip
1
Locking clip
2
Wire size selection dial
