Notice:
•
Repeat the Complete Cycle for all the 7 Printer
Devices
•
Retrieve each «Pre-Defined Profile» for each
HTP600 Printer Device
•
The Printer Device and the Printer Profile have
the same Name
HTP600 Quick Startup Guide
•
Select ENTRELEC TERMINAL BLOCKS
•
Press
Properties
•
Select the Folder
Profiles
•
Select the Profile “
ENTRELEC T-BLOCKS
”
•
Select
Retrieve
Notice: Sample below is for
«ENTRELEC TERMINAL BLOCKS» Printer device
3/4
Repeat the Operation for all the 7 printer Devices
•
Press
Yes
to continue
Step 5: Printer centering
Notice:
•
The centering Operation allows End-User to make
some adjustments to the print start position in
order to make corrections on printing centering
•
The coordinates (X, Y) can be modified for move
the starting point on the right, left, to the top.
•
In this manual the directions Right, Left, Top,
Bottom refer to HTS Software Preview Window:
To the bottom
To the left
To the top
To the right
Sample
refers
to
Terminal
Block
tags
RC510TT
and the Printer Device
“ENTRELEC
TERMINAL BLOCKS
”
• Run
HTS
• Select “File” > “
Printer Setup
”
• Select the
Centering Button
Printer HTP600 Quick Startup Guide 200707-English
