HTP600 Quick Startup Guide
Notice:
•
Turn The HTP600 Off
•
The printer must not be connected to the PC.
•
Unplug the USB cable from the printer
Driver Installation
•
Select the sub-folder \
HTP600-Printer
Drivers
•
Execute
Setup
Program
For Windows
®
7, 8, 10
(32 and 64 bit)
1/4
•
Press “
Install this Driver software anyway
”
After a few seconds
a “new hardware
found” message appears.
The P-PRINTER is detected and added.
•
Select “
Devices
”
•
Select
The “
P-PRINTER
” appears:
•
Check the Printer is
Turned off
or
disconnected
•
Press
Install
to Continue
The installation proceeds, it can take a few
minutes.
Notice:
For Automatic Plug and Play HTP600 Printer
•
Restart the PC
•
Insert Strong-Black ribbon
•
Plug the USB cable on the computer
•
Turn HTP600 On
•
Wait until HTP600 must be ON LINE
•
A Restart of the
PC
is requested.
Step 1: Driver Installation
•
Select
English
•
Press
Install
•
From
Start
•
Select “
Settings
”
Step 2: Automatic Creation of
7 Printer Devices in Windows
•
Execute
PPRCOPY.exe
•
Press
Ok
to proceed
•
Select the sub-folder \
HTP600-Printer Drivers
•
Select the sub-folder \
ENG
•
Select the sub folder \
HTP600 COPY DRIVER ENG
•
Execute program
\PPRCOPY.exe
•
Press
Ok
to Complete the Printers Installation
Notice:
•
The HTP600 Installation requires the creation of
7 different Printer Devices.
•
The creation process is Automatic
Printer HTP600 Quick Startup Guide 200707-English
Download Printer Driver and
Software on Te Server
