409-35009
Rev E
18 of 44
4.2.
Membrane keypad and display screen
The membrane keypad (Figure 16) is used to set up and operate the machine. The buttons operate as
described in Table 3.
Figure 16: Membrane keypad
Table 3: Membrane buttons
Button Name
Description
Decrease Speed
Decrease the motor speed* for normal cycle operations and for jogging.
Increase Speed
Increase the motor speed* for normal cycle operations and for jogging.
Error Reset
Clear the displayed error code.
Count Reset
Reset the batch count to zero.
Jog Forward
Rotate the motor forward at the jog speed set by the
Decrease Speed
and
Increase Speed
buttons.
Jog Reverse
Rotate the motor in reverse at the jog speed set by the
Decrease Speed
and
Increase Speed
buttons.
Air Feed
Toggle the air feed output on and off. The LED indicates the current setting.
Full Cycle
Select
Full Cycle
mode. When the foot switch is pressed, the terminator will
rotate one full cycle. The LED indicates that this mode is selected.
Split Cycle
Select
Split Cycle
mode. On the first press of the foot switch, the terminator
will rotate to the down position. On the second press of the foot switch, the
terminator will complete the cycle. The LED indicates that this mode is
selected.
*Speed indication:
Each
>
represents a portion of the full operation or jog speed setting. Values range
from minimum speed (
>
) to maximum speed (
>>>>>>
).
