ADCP-92-159 • Issue 1 • 2/2015
Page 12
© 2015, Tyco Electronics Corportation
2. If this is a 1RU panel (
), remove the two fanout holders and 13 radius limiters,
each held by a single screw. If this is a 2RU panel (
), remove the four semi-
circular radius limiters and the two brackets holding them.
Figure 12. Radius Limiters to be Removed from 1RU Panel
Figure 13. Radius Limiters and Brackets to be Removed from 2RU Panel
25837-A
FRONT SIDE
RADIUS
LIMITER (13X)
FANOUT
HOLDER (2X)
25838-A
FRONT SIDE
RADIUS
LIMITER (4X)
BRACKET (2X)
