408-9968
Rev
A
3
of 4
Figure 3
Figure 4
4.
DISCONNECT PIGTAIL CONNECTOR 83471-1 (Live Line Connector)
4.1.
Installation
1. Before installation ensure that the sliding wedge is secure in the connector body and moves easily on
the thread.
2. Turn eyebolt counterclockwise until wedge bottoms against body.
3. Bolt the jumper cable terminal to the NEMA pad.
CAUTION
Installation torque not to exceed 54.2 Nm [40 ft-lb] for ½ inch silicone bronze hardware.
4. Using a hot stick, grip disconnect eyebolt, and secure disconnect assembly utilizing the stabilizing ribs
as shown in Figure 5.
Figure 5
Wedge
Position Wedge
and Tap in Place
Tool
Install Tap
Disconnect Pigtail
Connector
Stabilizer Ribs in
Hot Stick Grooves
Hot Stick
