409-35013
Rev A
3
of 8
Terminator
Part Number
Description
Stroke
Customer Manual
Standard Machine
CQM
2362229-1
AMP 5K Atlantic DCCM Terminator
40mm
409-10100
2362229-2
AMP 5K Pacific DCCM Terminator
30mm
2362229-3
G II Atlantic DCCM Terminator
40mm
409-32035
Figure 1
1.
INTRODUCTION
This manual contains supplemental information on the operation and adjustments of the AMP 5K/40, 5K/30, and
GII (PN 2362229-[ ]) CE Terminating Machines with a Defective Crimp Cut Module (DCCM) installed (see
Figure 1).
The specifications and requirements for the CE Terminating Machines with a DCCM installed that differ from the
specifications and requirements of the standard machine are as listed below:
Weight:
77.6 Kilograms [171.1 lb] (2362229-1, 2362229-2)
107.2 Kilograms [236.3 lb] (2362229-3)
Air:
80 - 100 psi supplied to DCCM
NOTE
Information in this manual highlights the specific differences of machines with a DCCM installed when compared with those that do not
have a DCCM installed and does not provide complete information on the operation and maintenance of the overall terminating
machine. For information on the operation and preventative maintenance of 5K or GII machines refer to the applicable 409 Series
Customer Manual shown in the table in Figure 1.
