408-35019
Rev A
2
of 5
2.
DESCRIPTION
Die components are shown in Figure 1.
NOTE
Dimensions in this Instruction Sheet are in inches [with millimeters in brackets]. Figures are not drawn to scale.
3.
INSTALLATION AND REMOVAL OF DIE ASSEMBLY
NOTE
Refer to Figure 1, Figure 2, and Customer Manual
, Section 4.2, for die assembly and removal.
NOTE: Die Installation in PN 2217481 Head
Figure 2
3.
CONTACT SUPPORT ADJUSTMENT
NOTE
Due to the inclusion of a lower locating block, the contact support is not used to straighten the terminal in this application and
should be kept in the highest possible position.
Figure 3
Contact
Support
Adjustment Screw
for Contact Support
Locator
Note
: Not to Scale
Strip Length (Ref)
Wire Inserted
to Stop
Locator in
Contact
Wire Stop Slot
Contact
(Typ)
Lower
Locator
Block
