375 (08/13)
114-157020
Application specification
CLASS 1- Public
© 2016 TE Connectivity Ltd. family of companies.
All Rights Reserved.
| Indicates Change
TE Proprietary & Confidential Information
Class I Data Classification - See Policy TEC-02-04
21 of 23
Rev [A]
26 August 2021
9.10.
Assemble the metal body with metal connect nut
Align the contact positioner slot with groove inside the metal body to avoid rotation of contact positioner and
insert the sub assembly. Tighten the metal body with metal connect nut. Tighten the metal body with
maximum possible force by hand.
*Similar procedure for Female connectors
10. MATING AND UN-MATING
DANGER
To avoid personal injury, these connectors and cable assemblies must not be mated or unmated
under live conditions (electrical load).
The recommended torque for mating the connectors is:
M12 connectors: 0.6 Nm
11. REPLACEMENT AND REPAIR
These cable assemblies and connectors are not repairable. Damaged or defective components must not be
used. Connectors must not be re-used by removing the cable.
Fitting and servicing should only be performed by qualified personnel in accordance with all guidelines and
standards.
Maximum tight by hand
