409-35001
Rev C
25
of 92
Running the Board
Click on the “Production” button to enter the runtime production mode (see
Figure 27). If the machine axis has
not yet been homed, on screen message prompts will guide you through the steps to perform this action. After
pressing the on-
screen “run” button, the light curtain must remain uninterrupted until the homing process is
completed.
Figure 27
The first screen displayed upon entering Run mode will depend on the sequence that has been loaded for the
current board. See the “Start Pressing” section for details on information that may be requested before pressing
each board.
The run screen will display showing a rendering of the PCB based on the input data on the top left, a blank
graph for the pressing force vs. distance data on the top right, a multi-
purpose “action” button which contains
prompts and status text information in the bottom left, information about the current press sequence and
connector
in the bottom right, and a toolbar of buttons along the bottom. See the “Programming” section below
for details on setting up board sequences and creating connectors and tools in the database.
Figure 28
Содержание 2216055
Страница 34: ...409 35001 Rev C 34 of 92 Figure 35 Figure 36 ...
Страница 71: ...409 35001 Rev C 71 of 92 Figure 77 ...
Страница 72: ...409 35001 Rev C 72 of 92 Figure 78 Figure 79 ...
Страница 75: ...409 35001 Rev C 75 of 92 Figure 82 Figure 83 ...
