3 |
P a g e
**TIP:
The 8 lower frame pieces have different angles on the
clamp section that lines up with the Pilot holes- If the holes aren’t
lining up flip the lower frame brace around or use a different lower
frame piece for that section.
6.
With the Entire frame ready to attach the
retaining wall system- un-box the Vented
safety pad, and remove the buckle straps
from the vented pad clips. You will need to
install the receiving end of the buckle clips
onto the frame of the Trampoline prior to
installing the retaining wall system.
**TIP:
wrap the strap around the frame to the left of
each leg joint- buckle facing towards the interior of
the trampoline- fed through the buckle section, and
down through the place buckle.
7.
At this point refer to the TDU retaining
wall instructions to attach the retaining
wall of the complete bundle system.
**TIP:
additional video and installation tips or
images are available online- and additional
instructions are available to download.
8.
Once you have completed the TDU retaining
wall installation and backfill- your retaining
wall system should be installed level, and
properly backfilled, and you are now ready
to complete the Trampoline installation.
Installation of the Jumping mat and springs-
9.
Start by laying out the jumping mat and
connecting it to the frame of the
Trampoline by installing 1 spring every
5
th
hole until you have completed the
circle.
