December
2009 16 of 54
6.2.3
Password
To setup password for channel lock or censorship lock. User can change password here. The default
PIN Code is
0000
. See Figure 14.
6.2.3.1
Channel Lock
Lock the channel (program) which has been set lock status by password when turning on the
Channel Lock
. About setting program lock status, please check the section
2.3.1.3.
for more detail.
And lock many functions by password.
(1)
Press <Up/Down> button to select
Channel Lock
option.
(2)
Press <Left/Right> button to turn on or off the lock setting.
6.2.3.2
Censorship Lock
Lock the program by password and censorship threshold. The censorship info is in program content.
Under the censorship rating, user has to enter the password for watching program.
(1)
Press <Up/Down> button to select
Censorship Lock
option.
(2)
Press <Left/Right> button to set the rating.
6.2.3.3
Change Password
Change the PIN Code. If user forget the PIN Code, please contact the provider.
(1)
Press <Up/Down> button to select
Change Password
option.
(2)
Press <Left/Right> button to trigger changing password.
(3)
Press <0~9> button to enter old password.
(4)
Press <0~9> button to enter new password.
(5)
Press <0~9> button to confirm new password.
If success, it will display PIN Code changed message. Or it will display PIN Code Error message. See
Figure 15 ~ 19.
Figure 14. Password Page
Содержание DTR 3002CU PVR
