TDS VSi Series, Руководство по обслуживанию

Страница: 28 / 30

VSi,VS,RF Series Maintenance Guide
Switch on the power once a month
Switch on the sub power once a month. When you turn on the power, the machine automatically
performs some operations such as those to keep the print heads from drying out. Allowing the
machine to stand completely unused for a prolonged period may damage the print heads, so be
sure to switch on the power to perform these automatic operations.
Keep at a constant temperature and relative humidity
Even when the machine is not in use, keep it at a temperature of 5 to 40 degrees Celsius and a
relative humidity of 20 to 80 %( with no condensation). Temperatures that are too high may
degrade the ink and cause malfunction. Temperatures that re too low may cause the ink to freeze
and damage the heads.
Alarm Feature
This feature is to remind you to switch on the sub power once a month. When the machine
remains unused for about one month, this screen appears and a warning beep sounds. If the
screen appears, switch on the sub power. When maintenance operations finish, switch off the
sub power.
This feature operates when the printer’s main power is turned on. Be sure to always switch on the printers main power even if the
printer is not used for prolonged periods.
When Not in Use for a Prolonged Period, Precaution 1
In advance, insert ink cartridges that have a large amount of ink remaining.
If the ink runs out, the machine will not be able to periodically perform automatic maintenance.
If the machine is left in this state the print heads may malfunction. If you know that you will not
use the machine for a prolonged period, insert ink cartridges that have a large amount of ink
remaining.
When Not in Use for a Prolonged Period, Precaution 2
Discard the discharged fluid in advance of prolonged periods of disuse.
If you know that you will not use the machine for a prolonged period, follow the procedure below
to discard the discharged fluid.
Procedure