07
Binding drone to the controller
1. Fully insert battery into drone unit and place on level surface
Start / Stop the motors
Start the motors:
Pull the left stick to bottom-left and the right
stick to bottom-right at the same time, then
release.
Stop the motors:
Pull the left stick to bottom-left and the right
stick to bottom-right at the same time, then
release.
ON
3. To turn on the controller and begin binding, switch the power switch to “ON”
2. When 2 red LEDs flash rapidly, the drone is ready to bind
4. LED on the drone will stop flashing after binding has been successful
Pull both sticks in the direction shown
above will turn the motors on and off.
5. When binding is complete, live video should be available on the LCD display of the controller
Содержание 61351
Страница 16: ...16 Thank You Happy Flying...