AN-000260
Document Number: AN-000260
Page 5 of 10
Revision: 1.0
Each EV_MOD_CH101 requires its own PROG and INT lines, the remaining connections can be shared. Refer to the CH101 datasheet
for additional information.
Module connections using a flat flex cable (FFC) are shown in Figure 2-2.
Figure 2-2. EV_MOD_CH101 Module Connection (EV_MOD_CH101 acoustic port is facing down)
TABLE 2. RECOMMENDED FLAT FLEX CABLE AND CONNECTOR
FLAT CABLE CONNECTOR TYPE
RECOMMENDED FLAT CABLE
2.4
BILL OF MATERIALS
TABLE 3. BILL OF MATERIAL
QUANTITY
REFERENCE
PART
PCB FOOTPRINT
MANUFACTURER
MANUFACTURER
PART NUMBER
1
PCB
PCB
NA
1
U1
CH101-01
Custom
–
8 Pin
TDK
CH101-01
1
C1
100n 6.3V 20% X7R 0402
0402
TDK
CGA2B1X7R1C104K050BC
1
J1
Connector, FPC-FFC, 8-Pin
8Pin, 0.5 mm Pitch
Molex
503480-0800