TDK-Lambda GH10-150, Руководство по безопасности и установке продукта

Страница: 9 / 70

5
GENERAL SAFETY INSTRUCTIONS
READ SAFETY INSTRUCTIONS
The following safety precaution must be observed during all phases of operation, service and repair of this
equipment. Failure to comply with the safety precautions or warnings in this document violates safety
standards of design, manufacture and intended use of this equipment and may impair the built-in
protections within. TDK-Lambda shall not be liable for user’s failure to comply with these requirements.
SERVICING:
These products are not customer serviceable. Parts substitutions and modifications are by authorized
TDK-Lambda service personnel only. For repairs or modifications, the product must be returned to TDK-
Lambda service facility.
CRITICAL COMPONENTS:
These products are not authorized for use as critical components in nuclear control systems, life support
systems or equipment for use in hazardous environments without the express written approval of the
Managing Director of TDK-Lambda Ltd.
PRODUCT USAGE:
These products are designed for use as standalone equipment within a limits described in product Manual.
ENVIRONMENTAL:
These products are IP20, and therefore chemicals/solvents, cleaning agents and other liquids must not be
used.
ENVIRONMENT:
These products are designed for use within a Pollution Degree 2, Overvoltage Category II environment.
OUTPUT LOADING:
The output power taken from the products must not exceed the rating stated on the product label, except
as stated in the product Manual.
INPUT PARAMETERS:
These products must be operated within the input parameters stated in the product Manual.
END OF LIFE DISPOSAL:
The products contains components that require special disposal. Make sure that the unit is properly
disposed of at the end of its service life and in accordance with local regulations.