26
You now get access to writing commands for Windows. Write
‘ping 192.168.1.1’
in the prompt:
If there is no connection to the router, the following message will be shown in
the command prompt: If you get this message, you need to check whether the
connection between the router and the computer has been interrupted. Check
whether cables, network cards, and power plugs are correctly connected. You
can then run the installation again, if required.
If the router does not respond, you need to check whether the computer and the
router are physically connected as described in section 1 and whether the router
is switched on.
If the connection to the router is functioning correctly, you will get this message
in the command prompt:
If the router responds, you can now access the Internet. If you cannot access the
Internet, go to section 3 ‘Setup of browser’.
9. Technical information
Technical specifications for the router
• Physical measurements: 13.5 x 13.5 x 3.5 cm
• Power supply: 200-240 V, 50-60 Hz, 1 A
• Power consumption:
On:
Max 8.7 watt (with wireless and 4 ports enabled)
Off:
Max 0.3 watt
(complies with EU Code of Conduct as at 1 January 2007)
• Weight: 500 g
This product is WEEE-marked which can be seen from the crossed garbage
can at the bottom of the product. This means that WEEE-marked must not be
disposed of with unsorted household waste, but must be collected separately. In
