18
Troubleshooting
Problem
Possible Cause
Possible Cause
Riding
conditions are
too stressful
Use only on solid, flat, clean and dry
surfaces such as pavement or level
ground.
Scooter runs
sluggishly
Tires are not
properly inflated.
The tires are inflated when shipped,
but they invariably will lose some
pressure between the point of
manufacturing and your purchase.
Inflate to the proper pressure.
Scooter is
overloaded.
Make sure you do not overload the
scooter by allowing more then one
rider at a time, exceeding the 200lb
maximum weight limit, going up a
hill or towing objects behind the
scooter. If the scooter is overloaded,
the circuit breaker may trip and
shut off power to the motor. Correct
the riding conditions that caused
overload, wait a few seconds and
push the breaker to rest the circuit.
Avoid repeatedly tripping the circuit.
Sometimes the
scooter doesn’t
run, but other
times it does
Loose wires or
connectors
Check all tires around the motors
and all connectors to make sure
they are tight
Motor or
electrical switch
damaged
Contact your local authorized
service center for diagnosis and
repair.
Scooter makes
loud noises or
grinding sounds
Chain is too dry
Apply a lubricant on the chain.
