background image

14

Problem

Possible Cause

Possible Cause

Battery low on power

Recharge battery. After each use, or once a month 
minimum, charge the battery for a ‘full’ 8 to 12 
hours. DO NOT leave the battery on the charger for 
more than 20 hours.

Thermal fuse has tripped

Replace thermal fuse with new fuse. (See thermal 
fuse) 

Vehicle does not run

Battery connector or wires are loose

Check that the battery connector is firmly plugged 
into the motor connector.

Battery is dead

Replace battery. Please call us at 1-800-599-8898 
for battery replacement.

Electrical system is damaged

Check to see if water may have corroded the 
system. Loose dirt, gravel or sand might have 
jammed the switch.

Motor is damaged

Please call us at 1-800-599-8898.

Vehicle does not run very long

Battery is under charged

You may not be charging the battery long enough. 
After each use, or once a month minimum, charge 
the battery for a ‘full’ 8 to 12 hours. DO NOT leave the 
battery on the charger for more than 20 hours.

Loud grinding or clicking noises 

coming from motor or gear box

Motor or gears are damaged

Please call us at 1-800-599-8898.

Vehicle is overloaded

Reduce weight on vehicle. Do not overload the 
vehicle. Only one rider at a time. Maximum user 
weight is 66lbs.

Vehicle is being used in harsh conditions

Operate the vehicle on level ground and firm 
surfaces.

Poor contact of wires or connectors

Check that the battery connector is firmly plugged 
into the motor connector. If wires are loose around 
the motor please call us at 1-800-599-8898.

“Dead Spot” on motor

A dead spot means the electric power is not being 
delivered to the terminal connection and the vehicle 
needs repair. Call us at 1-800-599-8898.

Battery connector or adapter connector 
is loose

Check that battery connectors are firmly 
plugged into each other.

Charger not plugged in

Check that battery charger is plugged into a 
working wall outlet.

Battery bubbles or gurgles 

when charging

This is normal and not a cause for concern

Charger feels warm when 

recharging

This is normal and not a cause for concern

Troubleshooting Guide

Completely read through this manual and the troubleshooting guide table before calling. If you still need help resolving the problem you can 

call us at 1-800-599-8898

6V Battery will not recharge

Vehicle runs sluggishly

or beeping

occurs

Vehicle needs a push to go

forward

Содержание Mini QUAD


















Отзывы: