Buttons on DVR function description
:
Power button
：
SHORT press to POWER ON; LONG press to TURN OFF; NOTE: when DVR has power turned on
(connected), it will automatically turn on and start recording; when power is turned off (disconnected), the DVR will
have a delayed shutdown
Up button
：
Mute audio key function (while on live view screen); move up in the menu settings.
Down button:
Switch between image display mode (front, back, PIP); move down in the menu settings.
REC/OK button
：
Start and stop recording of video / confirm selection on DVR
Menu button
：
Short press to enter into the menu settings; switch menu page; exit menu settings
Mode button
：
Short press to enter into the photograph
mode; playback mode
Installation Recommendations
1. Quick remove joints
Located on the wire by color, can be removed and connected quickly: (Note that the corresponding joints are paired
by color: red for power, yellow for SOS button, black for both cams.)
2. Installation of fixed position
(Host, both cams, SOS button)
Be careful during install to pay attention to, and avoid, the locations with too high temperatures, humidity, and
excessive vibration amplitude.
( A ) Cams and power wire line, please avoid the engine, high voltage coil, spark plug etc.
( B ) It is suggested to place the DVR HOST in the compartment of the motorcycles or in a secured place. Shows
as the following figure:
