By NCK Team
GIN/One Touch 918(N/A/D/S) L2 repair document
ED
1.0
GIN Level 2 Repair Document
6/27
All right reserved. Passing on and copying of this document, use and communication are not permitted
without authorization
dedicated SIM card. Use the correct SIM card.
Enter the phone code if necessary.
If power on OK, test step by step with the auto test code:
-press *#2886# in dial screen and select “go” to begin the testing(if one of the testing failed, it will retest
from the first one)
- Test TRACABILITY, it will display CU_reference, BT address and WIFI address…
- Test Battery temperature, there will display current Battery temperature
-Test BACKLIGHT Level, the screen blacklight will flashing
-Test KBD BACKLIGHT, the keyboard backlight will flashing
- Test VIBRATOR. The phone will vibrate.
- Test CAMERA IMG, Scene will be shown on the screen.
- Test MIC, when you start it, it will record the sound, please speak loudly and then select stop and play
to confirm the MIC.
- Test MELODY, a audio will auto play.
- Test Headset, Insert the headset and make the voice, you will hear the sound from the headset.
- Test SIM, Press pass if detect SIM card.
- Test MEMORYCARD, The phone will recognize the card when you insert it.
- Test USB, Insert USB connector to phone in time. Will showed pass.
-Test the BT. The phone will running the BT and show the BT address on screen. Press pass to continue,
and BT will turn off.
-Test the WIFI, The phone will running the WIFI and search the WIFI network.
- Test GSENSOR, put the handset face up and towards up, then to the Left, Right, Up and Down,
-Test COMPASS, if it‟s OK, press pass to continue
-Test the GPS. The phone will running the GPS and search the satellite.
-Test keypad. Press every key showed in the screen, the corresponding key on the screen will be
disappear.
- Test ALS/PS, if it‟s OK, press pass to continue
3. SOFTWARE UPGRADING
In level 2 Repair center, we can do software downloading for the mobile which need software updated,
which you need a PC and downloading cable
.
The downloading cable reference is CDA3122002C1
。
You
can download
software tool and “USB VCOM driver” from TS website:
(1)
When doing SW upgrade, you need:
1
、
A handset with full battery.
2
、
PC with common windows system.
3
、
A USB cable.
4
、
USB VCOM driver
