TCS US4010 Скачать руководство пользователя страница 21

Страница: 21 / 32

2800 Laura Ln, Middleton WI 53562 | 800.288.9383 Fax: 608.836.9044 | www.tcsbasys.com

USER

INTERFACE

8:00 AM Monday

: System changes to Occupied A schedule, which uses the A heating and cooling setpoints.

5:00 PM Monday

: System changes to Unoccupied schedule which uses the Unoccupied heating and cooling setpoints.

Saturday and Sunday

: The Unoccupied setpoints are in effect for the entire day.

Setpoint Change Example

: This schedule represents a business that opens at 10:00 AM and closes at 9:00 PM weekdays,

and closes at 8:00 PM on weekends. On weekdays this business has a cleaning crew that comes in for two hours after

close. This business has set a different schedule (group of setpoints) for the cleaning crew compared to their daytime

employees.

Figure 10

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

Occupied A @

10:00 AM

Occupied A @

10:00 AM

Occupied A @

10:00 AM

Occupied A @

10:00 AM

Occupied A @

10:00 AM

Occupied A @

10:00 AM

Occupied A @

10:00 AM

Occupied B @

9:00 PM

Occupied B @

9:00 PM

Occupied B @

9:00 PM

Occupied B @

9:00 PM

Occupied B @

9:00 PM

Unoccupied @

8:00 PM

Unoccupied @

8:00 PM

Unoccupied @

11:00 PM

Unoccupied @

11:00 PM

Unoccupied @

11:00 PM

Unoccupied @

11:00 PM

Unoccupied @

11:00 PM

12:00 AM Monday (midnight)

: The automatic transition to Unoccupied has no effect, because the system was already

Unoccupied.

10:00 AM Monday

: Store opens and schedule changes to Occupied A schedule, which uses the A heating and cooling

setpoints.

9:00 PM Monday

: Store closes and cleaning crew arrives. System changes to Occupied B schedule, which uses the B

heating and cooling setpoints.

11:00 PM Monday

: Cleaning crew leaves. System changes to Unoccupied schedule which uses the Unoccupied heating

and cooling setpoints.

Bar/Restaurant Schedule Example

: This schedule represents a bar or restaurant that opens at 10:00 AM, and closes at

2:00 AM the next day, and is closed on Sunday. To stay Occupied after midnight, an entry is created to override the auto-

matic change to Unoccupied.

Figure 11

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

Occupied A @

10:00 AM

Occupied A @

12:00 AM

Occupied A @

12:00 AM

Occupied A @

12:00 AM

Occupied A @

12:00 AM

Occupied A @

12:00 AM

Occupied A @

12:00 AM

Unoccupied @

2:00 AM

Unoccupied @

2:00 AM

Unoccupied @

2:00 AM

Unoccupied @

2:00 AM

Unoccupied @

2:00 AM

Unoccupied @

2:00 AM

Occupied A @

10:00 AM

Occupied A @

10:00 AM

Occupied A @

10:00 AM

Occupied A @

10:00 AM

Occupied A @

10:00 AM

10:00 AM Monday

: Bar/Restaurant opens and system transitions to Occupied A schedule, which uses the A heating and

cooling setpoints.

12:00 AM Tuesday - Saturday

: This entry causes Occupied A schedule to remain in effect, overriding the automatic transi-

tion to Unoccupied.

2:00 AM Tuesday - Saturday

: Bar/Restaurant closes and system changes to Unoccupied schedule, which uses the Unoc-

cupied heating and cooling setpoints.

10:00 AM Tuesday - Saturday

: Bar/Restaurant opens and system transitions to Occupied A schedule, which uses the A

heating and cooling setpoints.

12:00 AM Sunday

: This entry causes Occupied A schedule to remain in effect, overriding the automatic transition to Unoccupied.

Содержание US4010

































Результаты поиска

Содержание US4010

Отзывы:

Похожие инструкции для US4010

Бренды по названию

Популярные бренды

TCS US4010, Руководство по эксплуатации продукта

Результаты поиска

Содержание US4010

Отзывы:

Похожие инструкции для US4010

Бренды по названию

Популярные бренды