TCS QWL4.1 Скачать руководство пользователя страница 3

Страница: 3 / 45

2800 Laura Lane • Middleton, WI 53562

800.288.9383

www.tcsbasys.com

Building Automation Systems

Congratulations on choosing the TCS QWL4.1 Integrated Building Manager! For facilities managers responsible for

multiple sites across multiple geographic locations, the QWL4.1 Integrated Building Manager provides the tools to

increase energy savings, reduce operational and maintenance costs, provide better indoor air quality, and increase

occupant comfort.
The QWL4.1 Building Manager utilizes Ubiquity Cloud™ building management technology, a QD2040d Panel Gateway, an

SLQ218 Lighting Controller, and an SEQ100 Pulse Meter for continuous monitoring of electrical, gas, and water usage.
This manual includes all the information you will need to properly install and set up your QWL4.1 . It is divided into four

sections:

•

Installation

: The Installation section covers the initial mounting, input wiring and connection of the QWL4.1 to your

network of control devices. Read and throughly understand this section before beginning the actual installation of the

unit.

•

Gateway Configuration

: Most units come with the Building Manager’s Gateway preconfigured; if your unit’s Building

Manager was preconfigured by TCS, you can skip this section. However, some customers order their units without

being configured beforehand; for those customers, we include this section which contains essential information

necessary to set up the Building Manager’ Gateway.

•

Lighting/Pulse Meter Programming

: Lighting and pulse meter programming can be accomplished via Ubiquity Cloud.

Read the Lighting/Meter Programming section to learn the basics of properly programming the SLQ218 Lighting

Controller and the SEQ100 Pulse Meter to your site specifications.

•

Appendices

: Appendices A, B, and C provide supplemental information regarding connecting a laptop or keyboard

and monitor directly to the QWL4.1 for local programming and/or configuring the components of the QWL4.1.

Appendix D provides information on using TCS Insight software, a service tool that can be used to program the QWL

locally. TCS Insight is a very powerful service tool that should be used only by trained technicians.

If you have any questions regarding your QWL4.1 or your network, do not hesitate to contact TCS Technical Support at

800.288.9383, ext. 2.

Introduction

Содержание QWL4.1














































Результаты поиска

Содержание QWL4.1

Отзывы:

Похожие инструкции для QWL4.1

Бренды по названию

Популярные бренды

TCS QWL4.1, Руководство по установке

Результаты поиска

Содержание QWL4.1

Отзывы:

Похожие инструкции для QWL4.1

Бренды по названию

Популярные бренды