TCS QWL4.1 Скачать руководство пользователя страница 16

Страница: 16 / 45

2800 Laura Lane • Middleton, WI 53562

800.288.9383

www.tcsbasys.com

Building Automation Systems

Gateway Configuration

IMPORTANT:

The Gateway Configuration section is for customers who did not

order their QWL4.1 preconfigured by TCS, or who need to reconfigure their unit.

If you ordered your QWL4.1 preconfigured by TCS, which is typical, you can skip this

section and jump to

Lighting/Pulse Meter Programming on page 24

Introduction to Gateway Configuration

The QWL4.1 utilizes an internal Gateway to communicate with Ubiquity Cloud and the attached device networks. This

Gateway can be configured locally by connecting a laptop directly to the device, or by connecting a monitor and keyboard.

When using a laptop, you can configure the Gateway through the QWL4.1’s internal web page. When using a monitor and

keyboard, you can configure the Gateway via the text-based Command Line Interface (CLI).

NOTE:

All Ubiquity Cloud services are accessed by logging into the Ubiquity Cloud Server (

www.ubiquitysystems.net

not by using the internal Gateway.

The unit is preconfigured with a default Gateway login and password, which is supplied to customers upon request. It is

the customer’s responsibility to configure a custom login and password. Contact TCS Technical Support (800.288.9383,

ext. 2) for information on managing Gateway login credentials.

Gateway Configuration Via Laptop

Once you have made a connection and have logged in (see

Appendix A: Local Management Port on page 29

) you can

configure the operation of the unit by selecting the proper parameters for your application.

If you are unable to access the configuration page, contact TCS Technical Support (800.288.9383, ext. 2) for assistance.

Installation Information

The Hardware Identity section contains unit-related information used to uniquely identify the unit when it is being serviced

in the field. The Software Status section contains software/application-related information that identifies the level of

patching of the unit. The Site Time is used by the local network and the QWL4.1 until the Ubiquity Cloud Server performs a

time synchronization with the site.

NOTE:

Be sure to set the correct time zone so that the site will correctly adjust the time during future time

synchronizations with Ubiquity Cloud.

Once you are finished entering information in this section, click the Update Installation Info button.

Содержание QWL4.1














































Результаты поиска

Содержание QWL4.1

Отзывы:

Похожие инструкции для QWL4.1

Бренды по названию

Популярные бренды

TCS QWL4.1, Руководство по установке

Результаты поиска

Содержание QWL4.1

Отзывы:

Похожие инструкции для QWL4.1

Бренды по названию

Популярные бренды